• Handcrafted in Germany
  • German Engineered
  • HSpeed Design
  • Short Shifter
  • E-Mail: info@hspeed-shift-engineering.com
  • Handcrafted in Germany
  • German Engineered
  • HSpeed Design
  • Short Shifter
  • E-Mail: info@hspeed-shift-engineering.com

HSPEED Short Shifter 02J, 02M, 02Q VAG Track Edition

from 869.00 €

incl. VAT, plus delivery
Delivery time: 14 day(s)


  • HSpeed Short Shifter Audi, Seat, Skoda, VW Track Edition
  • Gearbox: 02J, 02M, 02Q
  • Gears: 5 - 6

INFO: You can use this HSPEED Track Edition Short Shifter with the 6-gear as well as with the 5-gear (02A) transmission! For this you only need the corresponding cable adapters, which you can buy separately from us. So if you ever convert to 02A, you only need the appropriate cable adapters.

Vehicle examples: Golf 2-7, Audi A3-S3, Audi TT, Seat Leon, Seat Ibiza

Our HSpeed Short Shifter fits Plug & Play and is mounted on the transmission tunnel by means of our specially developed sandwich plate.

Adjustment work or drilling on the tunnel to mount the shifter is not excluded.

The HSpeed Short Shifter shortens and optimizes the shifting travel of the H-shift and thus promotes fast and accurate shifting even under tension and load.

The center position spring installed by us supports you when changing gears and at the same time stabilizes the guide between the shifting lanes - for optimal feedback.

The positioning of the shift lever is designed for motorsports as well as for a very sporty driver close to the steering wheel.

Our HSpeed Short Shifter offers you the possibility to lock lower as well as higher gears (e.g. 2 or 5 speed also during shifting) via the adjustable gear stops to avoid shifting just at the quarter mile in the drift or on a short race track.

You also use the stops to set the left/right movement and the reverse lockout.

Reverse is operated by the pull lever on the shift knob, which unlocks the reverse lockout via a cable pull and clears the shift gate for reverse. This prevents reverse from being engaged accidentally in race or absolute escalation mode. But you can also use the lock to lock or unlock other gears to prevent shifting.

Due to the penchant for perfection and a master at the drawing board, result in perfectly designed components, with a very high stiffness despite the low weight.


Our short shifters are designed individually for each vehicle model and can only develop their full function in the corresponding vehicle type.

Our HSpeed Short Shifter, as well as all other products, are developed and built exclusively for motorsport! Do not have ABE or certificates!

For the conversion you need common tools and basic vehicle knowledge.

The fairing parts in the area of the shifting center console are to be removed.

the original shift cables must be relocated to the interior.

fits only 02J transmissions of the newer generations with the same length shift cables.

Information about the material

For the turning and milling parts we use only 7075 aluminum (also called aircraft aluminum).

The substructures are made of 3mm thick aluminum sheet AlMg3.

Furthermore we use stainless steel for the smallest parts.

dimensions: width: 12 cm | height: 40cm | length: 30cm

Included in delivery:

Pre-assembled HSpeed Short Shifter