• Handcrafted in Germany
  • German Engineered
  • HSpeed Design
  • Short Shifter
  • E-Mail: info@hspeed-shift-engineering.com
  • Handcrafted in Germany
  • German Engineered
  • HSpeed Design
  • Short Shifter
  • E-Mail: info@hspeed-shift-engineering.com

HSPEED Short Shifter Audi S2 Coupe 5-Gang

from 789.00 €

Delivery time: 7 day(s)

Description

  • HSpeed Short Shifter for Audi S2 Coupe
  • Gearbox type: 01A
  • Gears: 5


  • Our HSpeed Short Shifter fits plug & play and is adapted to the original mounting points. Adjustment work on the tunnel is not necessary.
  • The HSpeed Short Shifter shortens and optimizes the shifting travel of the H-shift and thus promotes fast and precise shifting even under traction and load.
  • The center position spring installed by us supports you when changing gears and at the same time stabilizes the guide between the shifting lanes - for optimal feedback.
  • The positioning of the shift lever is designed for motorsports as well as for a very sporty driver close to the steering wheel.
  • Our HSpeed Short Shifter offers you the possibility to lock lower and higher gears (e.g. 2 or 5 speed) via the adjustable gear stops to avoid shifting at the ¼ mile in the drift or on a short race track.
  • You also use the stops to set the left/right movement as well as the reverse lockout.
  • Reverse is operated by the pull lever on the shift knob, which unlocks the reverse lockout via a cable pull and clears the shift gate for reverse. This prevents reverse from being engaged accidentally in race or absolute escalation mode. However, you can also use the lock to lock or unlock other gears to prevent shifting.
  • Due to the penchant for perfection and a master at the drawing board, result in perfectly designed components, with a very high stiffness despite the low weight.


ATTENTION!

  • Our short shifters are designed individually for each vehicle model and can only develop their full function in the corresponding vehicle type.
  • Our HSpeed Short Shifter, as well as all other products, are developed and built exclusively for motorsport! Do not have ABE or certificates!
  • For the conversion you need common tools and basic vehicle knowledge.
  • Adaptation work on the fairing parts are not excluded according to vehicle type.
  • the original shift linkage is still used


Information about the material

  • For the turned and milled parts we use only 7075 aluminum (also called aircraft aluminum).
  • The substructures are made of 3mm thick aluminum sheet AlMg3.
  • furthermore we use stainless steel for smallest parts
  • dimensions: width: 14 cm | height: 35cm | length: 18 cm


Included in delivery:

Pre-assembled HSpeed Short Shifter